• <tr id="y6ycw"><strong id="y6ycw"></strong></tr>
    你的位置:首頁 > 新聞資訊 > 行業資訊

    減少因剪板機維修造成的一系列損失

    2018-08-03 16:06:00點擊:

      剪板機廠家現有產品以液壓剪板機,數控剪板機為主,那么在運用的過程中, 怎么才能確保剪切的質量呢。剪板機廠家天然有自己的一套衡量標準。

      氧氣緩沖器是對剪刀劃座起氧氣相等功效的,由于漏氣嚴重,導致相等功效大大降落,影響了剪板機的事景況態,對剪板機剪刃的沖擊十分十分大,方法顫動加重。

      同時,由于透漏嚴重,致使整機的緊縮氧氣壓力達不到工作壓力,從而無法翻開離合器,怎么怎樣工作。

      該準則走風部位嚴重是汽缸下蓋,軸與孔間的密封處,原密封圈為軸用密封圈35,即50×35×10,安頓在汽缸下蓋孔內,用孔用檔圈壓緊,而現有國標產品35為:43×35×10,外徑相差7mm。在施行流程中,鋼套的豐厚度必定要得當,要做到檔圈不但能安頓上,而而且要使鋼套能夠大約壓緊剪板機O型密封圈不產生透漏。

    The wind position of this criterion is seriously under the cylinder cover, the seal between the shaft and the hole. The original seal ring is 35 of the shaft seal ring, that is 50 x 35 x 10. It is under the cylinder Gekonne, and the hole is pressed with the gear ring, while the existing national standard products 35 are 43 x 35 * 10 and the external diameter is 7mm. In the implementation process, the size of the steel sleeve must be appropriate, not only to make the gear ring to settle, but also to make the steel sleeve about the cutting plate machine O seal ring does not leak.

    另类zozo人禽交美国牧场
  • <tr id="y6ycw"><strong id="y6ycw"></strong></tr>